It's been a busy week at Resin2Detail, and there's a lot to cover: a new engine entering prototype, a look ahead at the pipeline, and a customer build that deserves some serious attention. The Jacobs R-755: In Resin as of Today The R-755 is now in prototype. As of today, test prints are running in 1/48, followed by 1/72 and 1/32. This is a seven-cylinder air-cooled radial that powered everything from the Stearman PT-17 and Cessna T-50 to the Cessna L-19 Bird Dog — a genuinely

A big thank you to Yves Garin for sharing these great photos of our RFF48217 1/48 B-17 Pilot & Co-Pilot Control Column Upgrade installed and painted in his build! Built and painted by Yves Garin. Used with permission. This FAST-FIX 3D-printed resin set provides realistic, one-piece control columns and yokes that are fully 3D with realistic scale thickness and more to-scale than photoetch yet finer than most injection-molded parts. No assembly required—just clean the supports

Hi everyone Thanks for stopping by I am adding some interesting new engines to the lineup -- reaching a bit further back into American aviation history into the less-covered early war and interwar years. A Jacobs R-755 full kit with exhaust collector ring; individual cylinders available in the 1/32 version. 1/48 and 1/72 likely to be single-piece prints. All will have integrated ignition wires. 2 versions of the R-1340 radial for the Fast-Fix engine front line in multipl

Howdy Hope everyone had a great Summer -- now that the cold weather is setting in here in the Northeastern USA, attention is turning back to Modeling! It's prime model building season -- gearing up for the myriad Winter and Spring shows. On a personal note, I started a new position in July, so it has been an adjustment to say the least. Lead time stretched beyond my normal standards, due to the added daily commute and stress balancing my business, personal and professional