top of page
1/48 B-29 Superfortress Pilot and Co-Pilot Seat Upgrades

Set comes with two (2) highly-detailed replacement pilot and co-pilot seats for the Monogram B-29 Superfortress kit in 1/48.

3D printed (see below)


Some prior Experience handling 3D printed resin parts is highly recommended


A few notes on 3D printed parts

A sharp hobby knife will also be needed to carefully remove the support structures.

Great care has been given to the design and build orientation to minimize layering and pesky support structure residue. It is recommended that the modeler take a slow and methodical approach here, to avoid broken resin parts.

While not super brittle, the resin parts will crack under pressure, and are not as resilient as injection molded plastic.


This seat took me about 12 minutes to free from the support structures. I recommend starting with using a razor saw to carefully detach from bottom float, and then carefully work your way around the sides, snipping off the supports with shears. Trim nubs with sharp #11 and some sandpaper if you wish, to finish.

Ships from USA.
Condition = Brand New
Scale = 1/48
Manufacturer = RESIN2detail
SKU = 48200

1/48 B-29 Superfortress Pilot and Co-Pilot Seat Upgrades

SKU: R2D48200