1/32 Super-detailed Wright "Twin Cyclone" R-2600 Engine Upgrade Kit (EARLY)
 
Designed from the ground up with the ultimate level of detail, accuracy and ease of construction.
 
Will receive one unassembled 3D-printed kit as shown.
 
These are not cast parts — they are 3D printed in high resolution which allows not only the fine details to appear, but also allows for
integral wires and push rods which would otherwise be almost impossible to cast and mold traditionally;
 
Ease of assembly has been thought of with a low part count. For instance,
The accessories case is one piece with the entire intake manifold assembly — no fiddling with individual intake tubes is necessary.
Push rods are preattached to the cylinder head/rocker arms — and, they drop into place with minimal “fiddling” needed
Also setting this set apart from the pack, in addition to the items mentioned above:
Includes detailed Bendix-Stromberg pressure carburetor, a very complex little piece of equipment almost never seen in scale
 
Combined with other advantages over traditional resin casting such as zero part shrinkage, zero air bubbles and no massive casting blocks, makes this a sensible choice for the discerning modeler making an B-25, Helldiver era US aircraft model. Can even be a standalone display model.
 
Does not come with ignition wires and isn’t designed for a specific kit — can be adapted to a kit of your choosing
 
Removal of support structures (shown in picture) is necessary, though every effort has been made to minimize impact to the visible areas of the engine.
 
The built-up engine, shown, took me about 1-1/2 hours to remove supports and glue together with CA.
 
Some experience with resin aftermarket is recommended. But, installation is straight-forward.
 
Instructions Included
 
R2D32017